in ,

New AWS Config Rules – LambdaLess and rusty

New AWS Config Rules – LambdaLess and rusty_628aba02b26a5.png

AWS Config checks all your resources for compliance. With 260 managed rules, it covers a lot of ground. But if you need additional checks until now, you had to write a complex Lambda function. With the new “Custom Policy” type, it is possible to use declarative Guard rules. Custom Policy rules use less lines of code and are so much easier to read.

AWS CloudFormation Guard is a “general-purpose policy-as-code evaluation tool”, which means it interprets rules. The Guard tool is used inside AWS Config and you can use it offline , which makes development easy. It is written in Rust.

The first part of this post shows you the example from the AWS documentation, which checks a DynamoDB table. In the second part I will show you how to create these rules yourself.

What is AWS Config?



AWS Config

AWS Config checks your resources and provides configuration snapshots. All changes of these Configuration Items are stored in a timeline. So you may exactly see when resource configuration changes. In addition to that, you may query the config database for resources.

What types of rules exist?



AWS managed Rules

There are 260 managed rules. You can apply them quickly, and no code is needed. A list is provided in the Config documentation.



Custom Lambda Rules

Sometimes you need additional or special checks. Until April 2022, you had to write a custom Lambda rule. The AWS rdk – rule development kit supports the development of custom Lambda rules.
I have built some of those rules for several projects and found the development process quite complex. If you want to check only an attribute of a resource, you need about 40 lines of code.



Checking DynamoDB with a custom Lambda rule.

For instance if you want to check a DynamoDB table, in the Lambda function the first thing you have to do is check the table status, like in the DYNAMODB_ENCRYPTED Rule:

status_table = configuration_item["configuration"]["tableStatus"]
     if status_table == "DELETING":
     return build_evaluation_from_config_item(configuration_item, 'NOT_APPLICABLE')
Enter fullscreen mode

Exit fullscreen mode

You can see the whole 440 line Lambda function in the AWS Config Rules repository on github.



Custom Policy Rules

This is the same check as Guard 2.0 rule fragment:

 when configuration.tableStatus == 'ACTIVE'
Enter fullscreen mode

Exit fullscreen mode

There is also a change in the programming logic. You do not think in programm steps, you think in rules and filters. With the Guard rules you filter the not applicable items with the when query. These query are documented in the CloudFormation Guard repository.



First complete rule: Checking DynamoDB for point-in-time backup anables

In the Creating Custom Policy Rules documentation the example checks a Table for point in time recovery:

let status = ['ACTIVE']

rule tableisactive when
    resourceType == "AWS::DynamoDB::Table" {
    configuration.tableStatus == %status
}

rule checkcompliance when
    resourceType == "AWS::DynamoDB::Table"
    tableisactive {
        let pitr = supplementaryConfiguration.ContinuousBackupsDescription.pointInTimeRecoveryDescription.pointInTimeRecoveryStatus
        %pitr == "ENABLED"
}                      
Enter fullscreen mode

Exit fullscreen mode

Let’s break this down:

In the first rule, tableisactive,Tables are filtered for being ‘ACTIVE’.

The second rule called “checkcompliance” uses a variable pitr(point in time recovery) to check the supplementaryConfiguration.

This supplementaryConfiguration is the DynamoDB backup configuration. You read it with the AWS CLI:

aws dynamodb describe-continuous-backups --table-name $table
Enter fullscreen mode

Exit fullscreen mode

The output is, for example:

{
    "ContinuousBackupsDescription": {
        "ContinuousBackupsStatus": "ENABLED",
        "PointInTimeRecoveryDescription": {
            "PointInTimeRecoveryStatus": "ENABLED",
            "EarliestRestorableDateTime": "2022-04-25T16:38:44+02:00",
            "LatestRestorableDateTime": "2022-05-22T09:18:03.639000+02:00"
        }
    }
}
Enter fullscreen mode

Exit fullscreen mode

So supplementaryConfiguration.ContinuousBackupsDescription.pointInTimeRecoveryDescription.pointInTimeRecoveryStatus reads “ENABLED”, which evaluates to passing the check for this example table.

Unfortunately, I have not yet found any documentation on the supplementaryConfiguration for different resourceType.



Development Steps for a simple example

Now for a simpler example, how to develop custom Guard rules which only checks the base configuration of the resource, not the supplementaryConfiguration.

I will take the well known Lambda Runtime example. This example is also covered as a managed rule lambda-function-settings-check. The check evaluates to compliant if the Lambda Function uses the newest runtime of the development languages.



Guard Rule development steps

Step 1) Find configuration item and the structure
Step 2) Create the rule code
Step 3) Create Rule resource with debug option
Step 4) Create a PASS and a FAIL resource for testing
Step 5) Debug and change code with Logs



Step 1: Find configuration items

The structure of the configuration item can be found with the AWS CLI describe commands, like aws lambda get-function --function-name $name.

{
    "Configuration": {
        "FunctionName": "compare-py-9",
        "FunctionArn": "arn:aws:lambda:eu-central-1:795048271754:function:compare-py-9",
        "Runtime": "python3.9",
{...}
Enter fullscreen mode

Exit fullscreen mode

As the structure is correct, the case of the names is wrong. We need to look at the “Runtime” attribute, but is is stored as “runtime”. How do I know this?
The better way is to use the Config Resource Inventory.

Image description
Youd find items in the Config Dashboard (1). Open a Lambda Function item (2).

Image description
The rules are checked against this configuration item.

This is a fragment of the Config Configuration Item:

{
  "version": "1.3",
  "accountId": "795048271754",
{...}
  "resourceType": "AWS::Lambda::Function",
  "resourceId": "compare-py-9",
  "resourceName": "compare-py-9",
 {...}
  "configuration": {
    "functionName": "compare-py-9",
    "functionArn": "arn:aws:lambda:eu-central-1:795048271754:function:compare-py-9",
    "runtime": "python3.9",
{...}
Enter fullscreen mode

Exit fullscreen mode

So the field we check in Config is configuration.runtime.

Now I create the rule. You find the documentation for Guard in the github repository
You will see that there are mostly CloudFormation examples, because Guard is used for CloudFormation template checks in the first place. But it can be used for any structures.



Step 2: Create the rule code

The first part of the rule is to filter for the Resource type:

 resourceType == "AWS::Lambda::Function" 
Enter fullscreen mode

Exit fullscreen mode

If you check at the deepest configuration level, it is a good idea to check the API documentation for the allowed values.

The allowed runtime values are:

Valid Values: nodejs | nodejs4.3 | nodejs6.10 | nodejs8.10 | nodejs10.x | nodejs12.x | nodejs14.x | nodejs16.x | java8 | java8.al2 | java11 | python2.7 | python3.6 | python3.7 | python3.8 | python3.9 | dotnetcore1.0 | dotnetcore2.0 | dotnetcore2.1 | dotnetcore3.1 | dotnet6 | nodejs4.3-edge | go1.x | ruby2.5 | ruby2.7 | provided | provided.al2
Enter fullscreen mode

Exit fullscreen mode

As this attribute is not required (Required: No) I need to check for the existence at first:

  WHEN configuration.runtime !EMPTY {
}
Enter fullscreen mode

Exit fullscreen mode

For the values itself there is the “IN” function:

configuration.runtime IN ['python3.9','go1.x','nodejs16.x']
Enter fullscreen mode

Exit fullscreen mode

So the whole check is 6 lines long:

rule lambdaruntimenewest when
    resourceType == "AWS::Lambda::Function" {
     WHEN configuration.runtime !EMPTY {
    configuration.runtime IN ['python3.9','go1.x','nodejs16.x']
    }
}
Enter fullscreen mode

Exit fullscreen mode



Step 3: Create Rule resource with debug option

Open the Config Service in the AWS console and create a rule with type “Create custom rule using Guard”. For this example the name is LambdaRuntime.

Be sure to add a description which tells the reader what attributes are checked.

Image description

1) The Name of the rule – the CloudWatch debug log will be named accordingly, here “LambdaRuntime”
2) A descriptive description
“Checks runtime of Lambda for newest runtime”
3) Enable logs – disable them later

Image description
4) Rule content

Image description

5) Limit to Lambda resources
6) AWS Resources (not third party)
7) Choose Lambda

You do not need a picture for these steps, do you?
8) Click “Next”
9) Click “Add rule” in the “Review and create” step



Step 4 Create a PASS and a FAIL resource for testing

Now you create a Lambda Function, which passes the check. Save the configuration item as “pass.json”.

Save the failing Lambda Function configuration as “fail.json”

You can use these files for local development later.



Step 5 Debug and change code with Logs

You will find the debug log in CloudWatch Log. The log group will have the name of the rule prepended like:

/aws/config/config-rule/LambdaRuntime/config-rule-awytio.

Make sure to set a retention time and disable the debug output option later, because a lot of log entries are generated.

Image description
Now you can Re-Evaluate the new rule to trigger an execution. If your pass Function passes and your fail Function fails, you are done!

This was development with the AWS console. Now I will show you the local development. First you have to install Guard according to Guard on github.



Local Development

With installed Guard tool, you can develop rules locally, if the do not use supplementaryConfiguration.

Save fail configuration item as fail.json and passed item as pass.json.

If you just want to test Guard, you can use the code at megaproaktiv on github – config-guard.



Validate fail

cfn-guard validate --data  fail.json --rules LambdaRuntime.rule
Enter fullscreen mode

Exit fullscreen mode

The data parameter points to the data file and the rules parameter to the rules file.

Output:

fail.json Status = FAIL
FAILED rules
LambdaRuntime.rule/lambdaruntimenewest    FAIL
---
Evaluation of rules LambdaRuntime.rule against data fail.json
--
Property [/configuration/runtime] in data [fail.json] is not compliant with [LambdaRuntime.rule/lambdaruntimenewest] because provided value ["nodejs14.x"] did not match expected value ["python3.9"]. Error Message []
Property [/configuration/runtime] in data [fail.json] is not compliant with [LambdaRuntime.rule/lambdaruntimenewest] because provided value ["nodejs14.x"] did not match expected value ["go1.x"]. Error Message []
Property [/configuration/runtime] in data [fail.json] is not compliant with [LambdaRuntime.rule/lambdaruntimenewest] because provided value ["nodejs14.x"] did not match expected value ["nodejs16.x"]. Error Message []
--
Enter fullscreen mode

Exit fullscreen mode



Validate Pass

cfn-guard validate --data  pass.json --rules LambdaRuntime.rule
Enter fullscreen mode

Exit fullscreen mode

Output:

pass.json Status = PASS
PASS rules
LambdaRuntime.rule/lambdaruntimenewest    PASS
---
Evaluation of rules LambdaRuntime.rule against data pass.json
--
Rule [LambdaRuntime.rule/lambdaruntimenewest] is compliant for template [pass.json]
--
Enter fullscreen mode

Exit fullscreen mode



Conclusion

The new Custom Policy Rules type makes the writing of simple checks very easy. The existence of the rules engine as a local open-source tool simplifies rules development.

The supplementaryConfiguration should be documented, which is not the case now.

Also, it is the first AWS Rust backend service I have seen, so this is an exciting trend!

What do you think about rusty Custom Policy Rules?

For more AWS development stuff follow me on twitter @megaproaktiv



See also

What do you think?

Silver 1

Written by yulica

Leave a Reply

Your email address will not be published.

      Today we updated our security protocol in the event of a cyberattack._628aba1255cdf.png

      Today we updated our security protocol in the event of a cyberattack

      Quick guide to FaceApi Machine learning model for web – ML5.js_628ab9ea3e74e.jpeg

      Quick guide to FaceApi Machine learning model for web – ML5.js